Set up a voice file in Claude
Turn 10 to 20 of your own writing samples into a voice profile and save it in a Claude Project's instructions and knowledge, or as a skill.
For Claude users who rewrite every draft to sound like themselves and want one place · Claude · Beginner
Researched, not run yetWhat that means
Copy the prompt
Fill in the [brackets] after you paste it.
PART 1:
Here are [NUMBER] pieces of my own writing, in this Project's knowledge and pasted below: [PASTE SAMPLES OR SAY "use the project files"]. Read them and draft a one-page voice profile I can save as project instructions. Use these sections: 1. Sentence habits (length, rhythm, fragments). 2. Tone (how I come across, with one quoted line as proof). 3. Words and phrases I use often. 4. Words, phrases and patterns I never use, including common AI habits like "it's not X, it's Y" and rule-of-three lists. 5. How I open and close messages. 6. Formatting habits (lists, length, sign-offs). Write it as rules a bot can follow, not adjectives. Quote my lines as evidence for each rule. Show me the draft profile first. Do not write anything else in my voice yet.
PART 2 (optional, for drafts outside this Project):
Now write a short version of that profile for my account instructions: the rules that change a draft the most, with no quoted evidence. Then write the same rules as a skill.md file that starts with this header:
---
name: my-writing-voice
description: Use when drafting emails, posts or other writing for me, so the draft follows my voice profile.
---Copied. Paste it into Claude next.
Free PDF
Get this setup as a PDF
Enter your email and a print-ready copy of this setup opens here, to save as a PDF. The free starter pack opens too. Tap confirm in the email that follows to get occasional new setups. Unsubscribe anytime.
Already a subscriber? Unlock it on this device
Free PDF
A confirmation email is on its way too: tap confirm in it to get new setups by email.
Three ways to run this setup
Free
Copy and paste it yourself
Copy the prompt above into ChatGPT, Claude or Grok. It drafts. You approve.
Go to the prompt$9 once
Complete Pack
One payment, no membership. Opens the pack pages: Bot Safety Checklist, Second Brain Starter Vault, Voice File Starter, Tested Grok Bot prompt pack, Write it as code prompts.
See the Complete PackFree to start, VIP $19 a month
Save it as a bot in the guided setup app
The app turns this setup into a bot with the draft-only rules. 3 setups build free; the rest are part of VIP. A human reviews a prompt or setup for you within 24 hours, up to 2 a month.
Build it in the app
Want this one tested next? Vote for it.
What you get back
Illustrative: lines from a voice profile saved as project instructions, not from a real run.
- Sentences: short, usually under 15 words. Fragments are fine.
- Opens with the answer or the ask in line one. Never opens with a greeting line.
- Says "thanks" plainly. Never says "just circling back".
See the rest of the example (1 more)
- Signs off with first name only.
3 steps
- Copy the prompt.
- Paste it into Claude.
- Fill in the [brackets], then read the answer before you send or use it.
Quick answer
Paste 10 to 20 pieces of your own writing into Claude and have it draft a voice profile. Then make a Project: open Projects, select + New Project, click Set project instructions, paste the profile and select Save instructions. Add your samples to the project knowledge with the + button. Anthropic says project instructions apply to all chats in that project. For drafts outside the Project, save a short version under Settings, Your Claude, Instructions, or as a skill. Test it on a real draft.
How do you set it up?
Tools
- Claude, on the web or the desktop app
- 10 to 20 pieces of writing you actually wrote: sent emails, posts, proposals (not AI drafts)
- A text file to keep the profile in, such as voice-profile.md
Steps
- Gather 10 to 20 pieces of your own writing. Mix the kinds you write most, such as customer emails, posts and proposals. Leave out anything AI drafted, and anything with client-confidential details.
- Open Projects in the left-side panel (or go to claude.ai/projects) and select + New Project. Name it, for example Voice profile. Anthropic says Claude does not see the name or description.
- Add your samples: on the project's main page, find the knowledge base on the right side, click the + button and upload them as files. Anthropic says Claude uses project knowledge as context in that project's chats.
- Start a chat in the Project and run the first part of the prompt below. Edit the profile until every rule is one a bot can follow, then click Set project instructions, paste it in and select Save instructions. Anthropic says Claude uses these instructions for all the chats within the project.
- Test it: start a new chat in the Project and ask for a short draft on a real topic. Compare it with one of your samples, add each miss to the instructions as a rule, and save again.
- Optional, for drafts outside the Project: run the second part of the prompt and paste the short version under Settings, Your Claude, Instructions, which Anthropic says apply to all conversations. Or save it as a skill: a folder holding a skill.md file that starts with a name and a description, zipped and turned on in Customize, Skills.
Where to paste this prompt
Claude → Project knowledge & custom instructions
More ways to run it
Which chat tools work with this prompt?
Paste the prompt into any of these assistants (free or paid tiers).
- Claude
How sure is this?
Last updated: · Last reviewed:
Before you use this
Who it is for: Claude users who rewrite every draft to sound like themselves and want one place that holds the profile and the samples behind it.
What it is allowed to do: Drafts for you. Writes drafts (emails, posts, plans, replies). You review and send. Nothing goes out without you.
At a glance: time, cost and difficulty
At a glance
All outcome figures are estimates from cited sources, not independent verification by us.
- What it is allowed to do
- Drafts for you
Writes drafts (emails, posts, plans, replies). You review and send. Nothing goes out without you.
- Time saved (estimate)
- Not measured yet
- Difficulty
- Beginner
- Tools needed
- Claude
- Typical cost
- Claude Projects: available on all plans, and Free accounts can create up to five (Anthropic). Skills: available on Free, Pro, Max, Ultra, Team and Enterprise plans, with code execution switched on (Anthropic). Plan prices: Not stated in sources.
Reviewed Nov 6, 2026
Basis (estimate): No timing claim: nothing in the sources measures time spent or saved for this job.
What usually goes wrong?
Where agents tend to stall on this job. More patterns in Where AI gets stuck.
- Asking for a draft in an ordinary chat and getting no voice. Project instructions apply only inside that project; start the chat in the Project.
- Pasting AI-written drafts in as samples. The profile then learns the bot's habits, not yours.
- The skill does not show up. Anthropic says skills need code execution switched on, and the ZIP must hold the skill folder at its root.
- Letting the profile go stale. When drafts start sounding generic again, add the new misses as rules.
What tips make it smoother?
- Upload the samples to the project knowledge rather than pasting them into one chat. Anthropic says context is not shared across chats in a project unless it is in the knowledge base.
- Keep the full profile in your own text file too. It is the master copy when the Project's version needs a refresh.
- Make the skill's description specific. Anthropic says Claude uses the description to decide when to use the skill.
Where do the claims come from?
Summaries use public sources linked below, not independent verification. How setups are picked.
- Read Anthropic’s write-up (support.claude.com)
Anthropic: Projects: available on all plans, Free can create up to five; open Projects in the left-side panel or claude.ai/projects, select + New Project; Set project instructions, then Save instructions, and Claude uses them for all chats in the project; add files with the + button in the knowledge base; private projects are visible only to you and invited members; each project has its own memory, and Use account memory can be turned off (read 2026-11-06).
- Read Anthropic’s write-up (support.claude.com)
Anthropic: Claude personalization: instructions under Settings, Your Claude apply to all conversations; project instructions apply only to chats in that project; skills can adjust tone and apply patterns based on your own writing. The page does not mention styles (read 2026-11-06).
- Read Anthropic’s write-up (support.claude.com)
Anthropic: Custom skills: available on Free, Pro, Max, Ultra, Team and Enterprise plans and need code execution enabled; a skill is a folder with a skill.md file whose frontmatter has a name (64 characters at most) and a description; zip the folder with it at the root and enable it in Customize, Skills (read 2026-11-06).
- Read Anthropic’s write-up (support.claude.com)
Anthropic: Memory: view and edit under Settings, Your Claude, Manage next to Your memory; on by default on Free, Pro, Max and Ultra; each project has its own memory; deleting a chat does not remove memories made from it (read 2026-11-06).
Common questions
- Where do I put my writing style in Claude?
- In a Project: Set project instructions holds the profile, and the knowledge base holds your samples. For every chat, a short version under Settings, Your Claude, Instructions, or a skill.
- Can I use Claude styles for my voice?
- This page leaves styles out. The Anthropic help pages checked for this setup do not cover styles, so the steps use project instructions, account instructions and skills, which those pages do cover.
- Do Claude Projects work on the free plan?
- Anthropic's projects page says Projects are available on all plans, and Free accounts can create up to five.
Free kit by email
Get the free kit by email
The starter pack and the Portable AI Office, sent to your inbox. New setups by email after that. Unsubscribe any time.
What to do next
- Make AI write in your voice
Paste 10 to 20 pieces of your own writing, get a one-page voice profile of habits and banned phrases, and save it where each bot reads standing instructions.
- Set up a voice file in ChatGPT
Turn 10 to 20 of your own writing samples into a voice profile and save it in ChatGPT custom instructions, a Project, or both.
- Set up a voice file in inbox agent
Turn 10 to 20 of your own writing samples into a voice profile, save it to inbox agent's Memory and Library, and check it before drafting.
Have a setup that works? Submit it. We credit sources and write it up in plain language.